Connectivity method: type S.
Polishing connector MTP: PC.
Polishing connector LC: PC.
Slide-in unit, radius limiter radius 35 mm, labeling strips and installation instructions
Metal front panel equipped with 12 x LC-Duplex adapters and fan-out inserted, rear side two MTP12-male connectors mounted
DESCRIÇÃO | VALOR/SÉRIE DE VALORES |
---|---|
Standard / norm | Geometrical specifications of MPO/MTP connectors acc. to IEC 61754-7 |
Protection class IP | IP 20 |
Protection class IP (A) | IP 20 |
Number of connectors (A) | 2 |
Protection class IP (B) | IP 20 |
Number of connectors (B) | 12 |
Wiring diagram | type S |
Assembly | fully populated |
Rack mounting version | slide-in unit |
Connector type (A) | MTP12-male |
Polishing plug (A) | PC |
Attenuation grade IL (A) | Cm |
Return loss grade RL (A) | 4 |
Connector color (A) | gray |
Connector type (B) | LC-Duplex |
Polishing plug (B) | PC |
Attenuation grade IL (B) | Bm |
Return loss grade RL (B) | 3 |
Connector color (B) | heather violet |
Sleeve material | ceramic |
Adapter fastening method | end cap snap-in |
Fiber type | multimode (MM) |
Fiber class | OM4 |
Fiber diameter | G50 / 125 µm |
DESCRIÇÃO | VALOR/SÉRIE DE VALORES |
---|---|
Dimensions | 35.0 mm x 129.0 mm x 215.0 mm / 1.378 in x 5.079 in x 8.465 in (W x H x D) |
Color Code RAL | 9005 Jet black |
MPO Modul 7HP, front (metal) populated with 12 LC-Duplex adapters (split sleeve ceramic), at the back mounted with two MTP12-male adapters (type B), with 12-faser fan-outs, MM 50 µm OM4, assembly class in acc. with IEC 61753-1. The twelve LC ports are divided into Tx and Rx so that all Tx fibers are run to a 12-fiber MPO and all Rx fiber to another 12-fiber MPO. These two MPOs can be bundled in an X cable, for example. Type B adapters are installed in the modules. Symmetric cabling for 1G, 10G, 40G and 100G is therefore enabled in collaboration with type B trunks. The geometrical specifications of MPO (MTP) connectors in acc. with IEC 61754-7; incl. radius limiter at radius 35 mm and hold-down cross, fully populated, detachable metal front panel featuring per-numbered ports and offering individual labeling options.
Features:
Dimensions: 35 (7HP) x 129 (3U) x 215 mm (W x H x D)
Material: front panel metal, MPO Modul sheet steel (DC01)
Color: front panel metal color, MPO Modul medium jet black (RAL 9005)