MPO Modul HD, 2xMTP12-female - 12xLC-Duplex, OM4, PC/PC, type S, gray
Escopo de fornecimento
Slide-in unit, radius limiter radius 30 mm, labeling strips and installation instructions
Plastic front panel equipped with 12 x LC-Duplex adapters and fan-outs inserted, rear side two MTP12-female connectors mounted
Technical Data
| DESCRIÇÃO | VALOR/SÉRIE DE VALORES |
|---|---|
| Standard / norm | UL Listed Geometrical specifications of MPO/MTP connectors acc. to IEC 61754-7 |
| Protection class IP | IP 20 |
| Protection class IP (A) | IP 20 |
| Number of connectors (A) | 2 |
| Protection class IP (B) | IP 20 |
| Number of connectors (B) | 12 |
| Wiring diagram | type S |
| Rack mounting version | slide-in unit |
| Connector type (A) | MTP12-female |
| Polishing plug (A) | PC |
| Attenuation grade IL (A) | Cm |
| Connector color (A) | gray |
| Connector type (B) | LC-Duplex |
| Polishing plug (B) | PC |
| Connector color (B) | heather violet |
| Sleeve material | ceramic |
| Adapter fastening method | end cap snap-in |
| Fiber type | multimode (MM) |
| Fiber class | OM4 |
| Conductor type | semi-tight buffer, dry |
| Fiber diameter | G50 / 125 µm |
| Insertion loss (IL) max. value | 0.35 dB |
| Return loss (RL) | 35 dB |
Mechanical Data
| DESCRIÇÃO | VALOR/SÉRIE DE VALORES |
|---|---|
| Dimensions | 43.2 mm x 109.9 mm x 214.4 mm / 1.701 in x 4.327 in x 8.441 in (W x H x D) |
| Color Code NCS | S 2502-B |
| Material | plastic: PC, fiber-glass reinforced, halogen-free |
Climatic Data
| DESCRIÇÃO | VALOR/SÉRIE DE VALORES |
|---|---|
| Operation temperature | 10 °C to 60 °C / +50 °F to +140 °F |
MPO Modul HD front populated with 12 LC-Duplex adapters (split sleeve ceramic), at the back mounted with two MTP12-female adapters (type B), with 12-faser fan-outs, MM 50 µm OM4, assembly class in acc. with IEC 61753-1. The twelve LC ports are divided into Tx and Rx so that all Tx fibers are run to a 12-fiber MPO and all Rx fiber to another 12-fiber MPO. These two MPOs can be bundled in an X cable, for example. Type B adapters are installed in the modules. Symmetric cabling for 1G, 10G, 40G and 100G is therefore enabled in collaboration with type B trunks. The geometrical specifications of MPO (MTP) connectors in acc. with IEC 61754-7; incl. radius limiter at radius 30 mm and hold-down cross, fully populated, plastic front panel featuring per-numbered ports, tool-free locking and unlocking system and offering individual labeling options.
Features:
Dimensions: 43.2 x 109.9 x 217 mm (W x H x D)
Material: module and front panel: plastic (PC, fiber-glass reinforced, halogen-free, UL 94 V-0)
Color: module and front panel: light gray (NCS 1005-R80B)
Install instructions
Data sheet
