Stranded loose tube cable, universal-use, imp. rodent protection, FRLSZH sheath - green, Eca, 12x24-fibers OM4


Improved rodent-protected, non-metallic stranded loose tube cable with up to 432 fibers in a 18-strand stranding, for indoor or outdoor duct installation.

Individual loose tubes are equipped with 24 fibers.

Technical Data

Cable type

Stranded loose tube cable

Jacket material

UV stable FRLSZH

CPR classification Eca

Intensified rodent protection

Fiber type


Fiber Count 288


Cable family code UX3x2,3GF
DIN/VDE Code U-DQ(BN)H wbg nx2,3
DoP no.: D9079
Loose-tube count 12
Fiber count per tube 24
Loose tube nominal diameter [mm] 2.3 mm
Loose-tube colour coding, - on each layer, rest of tubes white (fillers uncoloured or black)

FRP/coat. CSM nominal thickness [mm] 2.8 7 6.7
Outer jacket nominal thickness [mm] 1.4 mm
Cable outer diameter [mm] 15.3 mm
Cable version


Standard put-up length on drum 2100 m ± 5%
Halogen free, acid gases


Mechanical Data

Cable weight 220.0 kg/km / 148 lbs/1000ft
Tensile performance - in service

1500 N

Tensile performance - in service test method

IEC 60794-1-21:E1

Tensile performance - in service acceptance criteria

Δα ≤ 0,05 dB

Tensile performance - during installation

5000 N

Tensile Performance during Installation TestMethod

IEC 60794-1-21:E1

Tensile performance - during installation acceptance criteria

Δα ≤ 0,05 dB after test

Crush resistance - long term

1000 N/100mm

Crush resistance - long term test method

IEC 60794-1-21:E3A

Crush resistance - long term acceptance criteria

Δα ≤ 0,05 dB prior release, no damage

Impact resistance

10 Nm, 3 impacts, d=20 mm, R=300 mm

Impact resistance test method

IEC 60794-1-21:E4

Impact resistance acceptance criteria

Δα ≤ 0,05 dB after test, no damage


L = 1 m, rotation angle ±180°, 10 cycles

Torsion test method

IEC 60794-1-21:E7

Torsion acceptance criteria

no damage

Cable bend

d=20 x cable diameter, 4 turns, 3 cycles

Cable bend - test method

IEC 60794-1-21:E11A

Cable bend - acceptance criteria

Δα ≤ 0,05 dB after test, no damage

Repeated bending

R=20 x cable diameter, 25 cycles

Repeated bending test method

IEC 60794-1-21:E6

Repeated bending acceptance criteria

no damage

Climatic Data

Temperature cycling +40 °C +70 °C / +104 °F +158 °F
Installation temperature -5 °C +50 °C / +23 °F +122 °F
Operation temperature +40 °C to +70 °C / +104 °F to +158 °F
Transport / store temperature +40 °C to +70 °C / +104 °F to +158 °F
Creating documents