19" 1U PC Patch Panel 24xRJ45/s, Cat. 6A EL, gray, fully populated
Scope of Supply
19" 1U 24-port patch panel, empty, shielded
24 RJ45 Cat. 6A EL connection modules, shielded and dust covers
19" mounting kit
4 labeling strips
Cable ties
Installation instructions
Technical Data
| DESCRIPTION | VALUE/VALUE RANGE |
|---|---|
| Standard / norm | IEC 60603-7-51: Electrical Characteristics of the Telecommunication Outlets ISO/IEC 11801 EN 50173-1 |
| Protection class IP | IP 20 |
| PoE | Yes |
| Shielding connector (A) | shielded |
| Connector type (A) | RJ45 |
| Category connector (A) | Cat. 6A ISO |
| Number of connectors (A) | 24 |
| Holder for connector / module | Special (without mounting plate) |
| Assembly | fully populated |
| Fastening | 19 " |
| Rack mounting version | patch panel |
| Capacity (ports) | 24 |
| Amount of height units | 1 U |
Mechanical Data
| DESCRIPTION | VALUE/VALUE RANGE |
|---|---|
| Dimensions | 482.6 mm x 43.65 mm x 83.4 mm / 19 in x 1.719 in x 3.283 in (W x H x D) |
| Color | front, medium gray (NCS 2502-B) / steel, blue, chromatized |
| Material | plastic: PC, fiber-glass reinforced / steel: DC01 (1.0330), 1.5 mm |
Modular patch panel with integrated cable tie shelf, integrated grounding system, 19" fastening kit, labeling fields with exchangeable labeling strips. The ports are prepared for a visual color coding system and automated infrastructure management systems. Panel polycarbonate, fiber-glass-reinforced, halogen-free material, UL 94 listed and steel: DC01 (1.0330), 1.5 mm. Color front: medium gray (NCS 2502-B) / steel: blue, chromatized.
24 ports populated with
RJ45 connection module of Cat.6A EL, for the setting up of transmission channels of Class EA with up to 4 connectors acc. to ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1), complies with Cat.6A requirements of the standards ISO/IEC 11801, EN 50173-1 as well the U.S. standard Cat.6A according to TIA/EIA 568.2-D, re-embedded tested in acc. with IEC 60603-7-51 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.
Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.
Tested in line with R&M's manufacturing control, performing 100% inspection. Each module has an own serial number and is traceable.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with ≥4 insertion cycles acc. to IEC 60352-3, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. With integral cable strain relief, including dust cover, nickel plated zinc die-cast housing, ground contacting through 1 contact finger for flat connectors AMP 2.8 x 0.5 mm.
Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.
Connection module Cat.6A EL, die-cast, shielded and dust cover.
Install instructions
Data sheet
Others document(s)
