19" 1U ST Patch Panel 24xRJ45/s, Cat. 6A, gray, fully populated

R509882

1 pcs

Scope of Supply

  • 19" 1U 24-port metal patch panel, empty, integrated cable tie shelf

  • 24 Cat. 6A ISO connection modules, RJ45/s incl. EMC covers and dust covers

  • 19" mounting kit

  • 4 labeling strips

  • Cable ties

  • Installation instructions

Technical Data

DESCRIPTION VALUE/VALUE RANGE
Standard / norm

IEC 60603-7-51: Electrical Characteristics of the Telecommunication Outlets

ISO/IEC 11801

EN 50173-1

Protection class IP

IP 20

PoE Yes
Shielding connector (A)

shielded

Connector type (A)

RJ45

Category connector (A)

Cat. 6A ISO

Number of connectors (A) 24
Holder for connector / module

Snap-in frame

Assembly

fully populated

Fastening 19 "
Rack mounting version

patch panel

Capacity (ports) 24
Amount of height units 1 U

Mechanical Data

DESCRIPTION VALUE/VALUE RANGE
Dimensions 482.6 mm x 43.2 mm x 151.5 mm / 19 in x 1.701 in x 5.965 in (W x H x D)
Color

steel, blue, chromatized / front, gray (NCS 2502-B)

Material

steel: DC01 (1.0330), 1.5 mm

Patch panel with integrated cable tie shelf, optional direct grounding, 19" fastening kit, labeling field, accepting the snap-in type color coding clips in 8 colors.

Material: sub-rack made of sheet steel (DC01A) 1.5 mm, color blue chromatized, screen made of plastic (ABS), halogen-free, color medium gray (NCS 2502-B).

24 ports populated with

RJ45 connection module of Cat. 6A ISO, for the setting up of transmission channels of Class EA with up to 4 plugged connections acc. to ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1) and Class F on 2 pairs, complies with Cat. 6A requirements of the standards ISO/IEC 11801, EN 50173-1, as well the U.S. standard Cat. 6A according to TIA/EIA 568.2-D, re-embedded tested in acc. with IEC 60603-7-51 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.

Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.

Tested in line with R&M's manufacturing control, performing 100% inspection.

Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection with automatic wire cutting of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. X-Separator for individual pair shielding. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with >20 insertion cycles, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. 90° wire orientation without bending cable. With integral cable strain relief, including dust cover. Shield contacting by patented shield lance with integral cable strain relief, shield material tin-coated bronze, ground contacting through 1 contact finger for flat connectors 4.8 x 0.5 mm.

Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.

Connection module Cat. 6A ISO, shielded, with EMC cover, dust cover, snap-in frame (gray), cable tie and installation instructions.

Creating documents