19" 1U ST Patch Panel 24xRJ45/u, Cat. 6A, black, fully populated
Scope of Supply
19" 1U 24-port metal patch panel, empty, integrated cable tie shelf
24 Cat. 6A ISO connection modules, RJ45/u incl. dust covers
19" mounting kit
4 labeling strips
Cable ties
Installation instructions
Technical Data
| DESCRIPTION | VALUE/VALUE RANGE |
|---|---|
| Standard / norm | IEC 60603-7-41: Electrical Characteristics of the Telecommunication Outlets ISO/IEC 11801 EN 50173-1 |
| Protection class IP | IP 20 |
| PoE | Yes |
| Shielding connector (A) | unshielded |
| Connector type (A) | RJ45 |
| Category connector (A) | Cat. 6A ISO |
| Number of connectors (A) | 24 |
| Holder for connector / module | Snap-in frame |
| Assembly | fully populated |
| Fastening | 19 " |
| Rack mounting version | patch panel |
| Capacity (ports) | 24 |
| Amount of height units | 1 U |
Mechanical Data
| DESCRIPTION | VALUE/VALUE RANGE |
|---|---|
| Dimensions | 482.6 mm x 43.2 mm x 151.5 mm / 19 in x 1.701 in x 5.965 in (W x H x D) |
| Color | steel, blue, chromatized / front, black (RAL 9005) |
| Material | steel: DC01 (1.0330), 1.5 mm |
24 ports populated with
RJ45 connection module of Cat. 6A ISO, for the setting up of transmission channels of Class EA with up to 4 plugged connections acc. to ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1) and Class F on 2 pairs, complies with Cat. 6A requirements of the standards ISO/IEC 11801, EN 50173-1 as well the U.S. standard Cat. 6A according to TIA/EIA 568.2-D, re-embedded tested in acc. with IEC 60603-7-41 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.
Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.
Tested in line with R&M's manufacturing control, performing 100% inspection.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection with automatic wire cutting of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. X-Separator for individual pair shielding. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with >20 insertion cycles, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. 90° wire orientation without bending cable. With integral cable strain relief, including dust cover.
Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.
Connection module Cat. 6A ISO, unshielded, with dust cover, snap-in frame (black), cable tie and installation instructions.
Install instructions
Technical drawing(s)
Data sheet
Others document(s)
