RJ45 Cat. 6 connection module, unshielded
Snap-in adapter
Dust cover
Cable tie
Installation instructions
DESCRIPTION | VALUE/VALUE RANGE |
---|---|
Standard / norm | UL Listed EN 50173-1 IEC 60603-7: Electrical Characteristics of the Telecommunication Outlets ISO/IEC 11801 |
Protection class IP | IP 20 |
PoE | Yes |
Connector class | connection module |
Shielding connector (A) | unshielded |
Connector type (A) | RJ45 |
Category connector (A) | Cat. 6 |
Holder for connector / module | Snap-in |
Wiring diagram | T568A and T568B |
Poles | 8 |
DESCRIPTION | VALUE/VALUE RANGE |
---|---|
Dimensions | 18.2 mm x 22.7 mm x 41.3 mm / 0.717 in x 0.894 in x 1.626 in (W x H x D) |
Color | module, blue / Snap-in adapter, gray (NCS 2502-B) |
Material | plastic: PC, UL 94 V-0 |
As part of a Cat. 6 channel, the connection module exceeds the minimum requirements of the IEEE 802.3™ Section Four standard on 10GBASE-T performance, as well as the requirements for Class EA performance acc. to ISO/IEC 11801 and Cat. 6A performance according to TIA 568.2-D
Exceeds Cat.6 specifications acc. to ISO/IEC 11801, EN 50173 and TIA 568.2-D in the entire admissible range
Maximum reliability through special contact design without internal transfer points
Capacitive and inductive compensation
3P and UL certified
RJ45 connection module of Category 6, for the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1) as well as TIA/EIA 568.2-D, de-embedded tested in acc. with IEC 60603-7-4, interoperable and backwards compatible with Cat. 5e and Cat. 5.
Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 55 m.
Tested in line with R&M's manufacturing control, performing 100% inspection.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB-free and tool-free Easy-Lock connection of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with single-wire strain relief and >20 insertion cycles, contact resistance <50 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. With integral cable strain relief, including dust cover.
Mounting dimensions 14.9 x 19.5 mm, max. material thickness 1.6 mm.
Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.
Connection module Cat. 6, unshielded, with dust cover, snap-in frame (gray), cable tie and installation instructions.