Connection Module Cat. 6, 1xRJ45/u, 10x

R302373

10 pcs

Scope of Supply

  • RJ45 Cat. 6 connection module, unshielded

  • Mounting plate

  • Dust cover

  • Cable tie

  • Installation instructions

Technical Data

DESCRIPTION VALUE/VALUE RANGE
Standard / norm

UL Listed

EN 50173-1

IEC 60603-7: Electrical Characteristics of the Telecommunication Outlets

ISO/IEC 11801

Protection class IP

IP 20

IP 30

IP 10 (correlates to NEMA 1)

PoE Yes
Connector class

connection module

Shielding connector (A)

unshielded

Connector type (A)

RJ45

Category connector (A)

Cat. 6

Holder for connector / module

Mounting plate

Wiring diagram

T568A and T568B

Poles 8

Mechanical Data

DESCRIPTION VALUE/VALUE RANGE
Dimensions 17.0 mm x 21.5 mm x 41.0 mm / 0.669 in x 0.846 in x 1.614 in (W x H x D)
Color

blue

Material

plastic: PC, UL 94 V-0

  • As part of a Cat. 6 channel, the connection module exceeds the minimum requirements of the IEEE 802.3™ Section Four standard on 10GBASE-T performance, as well as the requirements for Class EA performance acc. to ISO/IEC 11801 and Cat. 6A performance according to TIA 568.2-D

  • Exceeds Cat.6 specifications acc. to ISO/IEC 11801, EN 50173 and TIA 568.2-D in the entire admissible range

  • Maximum reliability through special contact design without internal transfer points

  • Capacitive and inductive compensation

  • 3P and UL certified

Connection Module, Cat.6, 1 x RJ45, unshielded, for the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801, EN 50173-1, (DIN EN 50173-1) as well as TIA/EIA 568.2-D, de-embedded tested in acc. with IEC 60603-7-4, interoperable and backwards compatible with Cat. 5e and Cat. 5.

Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 55 m.

Tested on the basis of the R&M production control including 100% routine test.

Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB-free and tool-free Easy-Lock connection of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with single-wire strain relief and >20 insertion cycles, contact resistance <50 mOhm, dielectric strength >1000 Veff. With integral cable strain relief, including dust cover.

Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002.

Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.

Connection module Cat. 6, unshielded, with dust cover, cable tie and installation instructions.

Creating documents