19" 1U Angled Patch Panel 24xRJ45/s, Cat. 6A EL, Snap-in, black, fully populated

R813531

1 pcs

Scope of Supply

  • 19" 1U 24-port angled, metal patch panel, empty, integrated cable tie shelf

  • 24 Cat. 6A EL connection modules, RJ45/s incl. dust covers

  • 19" mounting kit

  • Labeling kit

  • Cable ties

  • Installation instructions

Technical Data

DESCRIPTION [UNIT] VALUE/VALUE RANGE
Standard

IEC 60603-7-51: Electrical Characteristics of the Telecommunication Outlets

ISO/IEC 11801-1 Ed 1.0 2017-11

EN 50173-1: May 2011

Protection class IP

IP 20

PoE Yes
Shielding connector (A)

shielded

Connector type (A)

RJ45

Category connector (A)

Cat. 6A ISO

Protection class IP (A)

IP 20

Number of connectors (A) 24
Holder for connector / module

Snap-in frame

Assembly

fully populated

Fastening 19 "
Rack mounting version

patch panel

Capacity (ports) 24
Amount of height units 1 U

Mechanical Data

DESCRIPTION [UNIT] VALUE/VALUE RANGE
Dimensions 482.6 mm x 43.2 mm x 245.3 mm / 19 in x 1.701 in x 9.657 in (W x H x D)
Color

steel, blue, chromatized / front, black (RAL 9005)

Material

steel: DC01 (1.0330), 1.5 mm

Angled patch panel with integrated cable tie shelf, optional direct grounding, 19" fastening kit, labeling field, accepting the snap-in type color coding clips in 8 colors. Material: sub-rack made of sheet steel (DC01) 1.5 mm, color blue chromatized, screen made of plastic (ABS), halogen-free, color jet black (RAL 9005).

RJ45 connection module of Cat. 6A ISO, for the setting up of transmission channels of Class EA with up to 4 connectors acc. to ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011 (DIN EN 50173-1), complies with Cat. 6A requirements of the standards ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011, as well the U.S. standard Cat. 6A according to TIA 568-C.2, re-embedded tested in acc. with IEC 60603-7-51 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.

Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.

Tested in line with R&M's manufacturing control, performing 100% inspection. Each module has an own serial number and is traceable.

Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with ≥4 insertion cycles acc. to IEC 60352-3, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. With integral cable strain relief, including dust cover, nickel plated zinc die-cast housing, ground contacting through 1 contact finger for flat connectors AMP 2.8 x 0.5 mm.

Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.

Connection module Cat. 6A EL, die-cast, shielded, dust cover and snap-in frame (black).

Creating documents