Connection Module Real10 Cat. 6, 1xRJ45/s, Snap-in, 100x


100 pcs

Scope of Supply

  • RJ45 Real10 Cat. 6 connection module, shielded

  • Snap-in adapter

  • EMC cover

  • Dust cover

  • Cable tie

  • Installation instructions

Technical Data


UL Listed

EN 50173-1: May 2011

IEC 60603-7: Electrical Characteristics of the Telecommunication Outlets

ISO/IEC 11801-1 Ed 1.0 2017-11

Protection class IP

IP 20

PoE Yes
Connector class

connection module

Shielding connector (A)


Connector type (A)


Category connector (A)

Real10 Cat. 6

Holder for connector / module


Wiring diagram

T568A and T568B

Poles 8
Product code description Module Real10 C6,1x100xRJ45/s,Snap-in Module Real10 C6,1x100xRJ45/s,Snap-in

Mechanical Data

Dimensions 18.2 mm x 22.7 mm x 41.3 mm / 0.717 in x 0.894 in x 1.626 in (W x H x D)

module, blue / Snap-in adapter, gray (NCS 2502-B)


plastic: PC, UL 94 V-0

  • As part of a Real10 Cat. 6 channel, the Real10 connection module exceeds the minimum requirements of the IEEE 802.3™ Section Four standard on 10GBASE-T performance, as well as the requirements for Class EA performance acc. to ISO/IEC 11801 ed. 2.2, June 2011 and Cat. 6A performance according to TIA 568-C.2

  • Exceeds Cat.6 specifications acc. to ISO/IEC 11801, EN 50173 and TIA 568-C in the entire admissible range

  • Maximum reliability through special contact design without internal transfer points

  • Capacitive and inductive compensation

  • Delta, GHMT and 3P certified

RJ45 connection module of Category 6, for the establishing of transmission channels of class E and class EA with up to 4 plugged connections, and class F on 2 pairs, complies with Category 6 requirements of the standards ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1, May 2011 (DIN EN 50173-1) as well as TIA 568-C, de-embedded tested in acc. with IEC 60603-7-5, interoperable and backwards compatible with Category 5e and Category 5.

Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.

Tested in line with R&M's manufacturing control, performing 100% inspection, plus permanent quality assurance through the "GHMT PREMIUM Verification Program" including certificate and test report acc. to DIN-EN ISO/IEC 17025, in German language.

Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB-free and tool-free Easy-Lock connection of installation cables AWG 24 – 22 (0.5 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with single-wire strain relief and >20 insertion cycles, contact resistance <50 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. Shield contacting by patented shield lance with integral cable strain relief, shield material tin-coated bronze, ground contacting through 2 contact fingers for flat connectors 4.8 x 0.5 mm.

Mounting dimensions 14.9 x 19.5 mm, max. material thickness 1.6 mm.

Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.

Connection module Cat. 6, shielded, with EMC cover, dust cover, snap-in frame (gray), cable tie and installation instructions.

Creating documents