The module for the classic office cabling. Easy to install with solid Cat. 6A performance.
The R&Mfreenet Cat. 6A EL connection modules, part of the Freenet cabling system, are ideal for voice, fast data transmissions and high bandwidth applications. This highperformance Cat. 6A module is perfect for use in 10 Gigabit Ethernet (10GBASE-T) and future high-speed applications up to 500 MHz.
RJ45 Cat. 6A EL connection module, shielded
|DESCRIPTION [UNIT]||VALUE/VALUE RANGE|
IEC 60603-7-51: Electrical Characteristics of the Telecommunication Outlets
ISO/IEC 11801-1 Ed 1.0 2017-11
EN 50173-1: May 2011
|Protection class IP||
|Shielding connector (A)||
|Connector type (A)||
|Category connector (A)||
Cat. 6A ISO
TIA-568A / TIA-568B
|DESCRIPTION [UNIT]||VALUE/VALUE RANGE|
Just two components
Terminated in just a few steps
Integrated strain relief
Automatic shield termination
Installation not requiring specialized knowledge
Shielded and unshielded
For all cable types and diameters
Can be rewired
Compatible with common platforms
Reliable insulation displacement contacting (IDC)
R&M warranty program Productive
Meets the Cat. 6A ISO component specification (for the entire re-embedded plug range as specified by the standards ISO/IEC 11801, EN 50173, TIA 568-C.2, IEC 60603-7-51 and 60603-7
Exceeding the IEEE 802.3 an minimum requements for 10GBASE-T performance
Achieves best transmission characteristics with R&Mfreenet Cat. 6A patch cables
Gold-plated contact area and tin-plated insulation displacement contact area
Capacitive and inductive compensation
Compatible with Cat. 6A standard patch cords and cables
Full mechanical and electrical backward compatibility with Cat. 5e/6
Fits into 3rd party outlets and patchpanel with 4 different adapter
Tool-free (w/o special tools) connection of installation cables of AWG 22 - 26 plus stranded cables of AWG 22/7 - 26/7
Wiring option according to TIA 568 A and B with parallel termination of the pairs without splitting of pair 3,6
Label with color wiring chart, integrated production date and serialnumber (each module) for quality tracing
PoE and PoE+ compatible
RJ45 connection module of Cat. 6A ISO, for the setting up of transmission channels of Class EA with up to 4 connectors acc. to ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011 (DIN EN 50173-1), complies with Cat. 6A requirements of the standards ISO/IEC 11801 ed. 2.2, June 2011, EN 50173-1 May 2011, as well the U.S. standard Cat. 6A according to TIA 568-C.2, re-embedded tested in acc. with IEC 60603-7-51 and 60512-27-100, interoperable and backwards compatible with Category 6 and Category 5e.
Suitable for 10GBASE-T applications in acc. with IEEE 802.3™ Section Four up to 500 MHz and 100 m.
Tested in line with R&M's manufacturing control, performing 100% inspection. Each module has an own serial number and is traceable.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), connection of installation cables AWG 26 – 22 (0.4 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7 without special tools. Parallel pair termination without crossover in acc. with TIA 568-A/B, gold-plated bronze contacts for >1000 mating cycles, IDC contacts with ≥4 insertion cycles acc. to IEC 60352-3, contact resistance <5 mOhm, dielectric strength >1000 Veff. Supports PoE (IEEE 802.3af), PoEP (IEEE 802.3at), 4PpoE (IEEE 802.3bt) and is compatible to IEC 60512-99-001/002. With integral cable strain relief, including dust cover, nickel plated zinc die-cast housing, ground contacting through 1 contact finger for flat connectors AMP 2.8 x 0.5 mm.
Material: halogen-free and heavy-metal free in acc. with EU directives RoHS 2.
Connection module Cat. 6A EL, die-cast, shielded, dust cover and adapter No.1.
||Cable Insert Cat. 6A EL, 4-5 mm Cable||R813797||ADD TO WISH LISTREMOVE FROM WISH LIST|
||Copper foil for Module Cat. 6A EL, 10x||R824374||ADD TO WISH LISTREMOVE FROM WISH LIST|
||Copper foil for Module Cat. 6A EL, 100x||R814599||ADD TO WISH LISTREMOVE FROM WISH LIST|
||Adapter 90° Module RJ45 C6A-EL/s-10||R833665||ADD TO WISH LISTREMOVE FROM WISH LIST|