Products

Freestanding Distribution Frame H/V

5 PRODUCTS
Back Mount Frame, 8 pairs (25 mm)

Back Mount Frame, 8 pairs (25 mm)

Back mount frame for 8-pair VS Standard modules. With the capacity to accommodate up to ten 8-pair connection and disconnection modules. Cables with diameters of up to 35 mm can be inserted at the rear through an edge-protected entry.

Material: stainless steel (CrNi).

Back Mount Frame, 8 pairs (25 mm), 50 x 250 mm / 10

Back Mount Frame, 8 pairs (25 mm), 50 x 250 mm / 10

Back mount frame for 8-pair VS Standard modules. With the capacity to accommodate up to ten 8-pair connection and disconnection modules. Cables with diameters of up to 35 mm can be inserted at the rear through an edge-protected entry.

Material: stainless steel (CrNi).

Product No. R27225-08
Back Mount Frame, 10 pairs (25 mm)

Back Mount Frame, 10 pairs (25 mm)

Back mount frame for 10-pair VS Standard modules. With the capacity to accommodate up to ten 10-pair connection and disconnection modules. Cables with diameters of up to 35 mm can be inserted at the rear through an edge-protected entry.

Material: stainless steel (CrNi).

Back Mount Frame, 10 pairs (25 mm), 50 x 250 mm / 10

Back Mount Frame, 10 pairs (25 mm), 50 x 250 mm / 10

Back mount frame for 10-pair VS Standard modules. With the capacity to accommodate up to ten 10-pair connection and disconnection modules. Cables with diameters of up to 35 mm can be inserted at the rear through an edge-protected entry.

Material: stainless steel (CrNi).

Product No. R27225-10
Strain Relief Rail

Strain Relief Rail

We recommend fitting R&M horizontal/vertical distribution frames with strain relief rails. Incoming cables are strain relieved before installation, and then neatly inserted into the frames. The strain relief rail is mounted directly to the floor and allows a just as neat fixing of the cables with quick cable installers.

Strain Relief Rail, 3 verticals

Strain Relief Rail, 3 verticals

We recommend fitting R&M horizontal/vertical distribution frames with strain relief rails. Incoming cables are strain relieved before installation, and then neatly inserted into the frames. The strain relief rail is mounted directly to the floor and allows a just as neat fixing of the cables with quick cable installers.

Product No. R20010-03
Strain Relief Rail, 4 verticals

Strain Relief Rail, 4 verticals

We recommend fitting R&M horizontal/vertical distribution frames with strain relief rails. Incoming cables are strain relieved before installation, and then neatly inserted into the frames. The strain relief rail is mounted directly to the floor and allows a just as neat fixing of the cables with quick cable installers.

Product No. R20010-04
Strain Relief Rail, 5 verticals

Strain Relief Rail, 5 verticals

We recommend fitting R&M horizontal/vertical distribution frames with strain relief rails. Incoming cables are strain relieved before installation, and then neatly inserted into the frames. The strain relief rail is mounted directly to the floor and allows a just as neat fixing of the cables with quick cable installers.

Product No. R20010-05